Nanoduct® 1030 - sweat test possible in the first days of life.
Advantages of Nanoduct® 1030:
- Unique analysis method: Sweat sample is analysed by reading the conductivity value - in mmol/L (NaCl equivalent)
- Minimum sample volume: The amount of sweat sample - 3 µl is sufficient
- Minimum time of sweat stimulation: The sweat stimulation procedure by pilocarpine iontophoresis takes only 2.5 minutes
- Versatility: Includes a phase of stimulation, sweat collection and simultaneous data analysis, which minimises the influence of the human factor
- Age requirements: Provides diagnosis of cystic fibrosis in patients of any age group, even newborns
Technical characteristics:
- Method of analysis: Classical sweat induction method using pilocarpine ionophoresis, followed by electrical conductivity analysis of the sweat sample
- Measuring range: 3 to 200 mmol/l (NaCl equivalent)
- Accuracy: ≤1% within the range of 25 to 150 mmol / l (NaCl equivalent)
- Sample volume: 3 µl
- Sweat stimulation time: 2.5 minutes
- Total analysis time: 20 minutes
- Indication of initial sweat rate: 0 to 50 g/m2/min
- Adjustment of sweating stimulation: The current parameters are adjusted to suit the use of Pilogel® gel discs. The rated current is 0.5 (± 0.2) mA for 2.5 minutes (± 0.2 seconds). Maximum safe current is limited to no more than 5 mA
- Calibration: Automatic single point calibration at 80 mmol/L (NaCl equivalent)
- Display: 128 x 64 dots, 8 lines of 16 characters or digits
- Electrode connection: 6-pin medical connector for connection to sweat stimulation / sweat analysis unit, cable
- Operating temperature: 15 - 30℃
- Power supply: Four AA alkaline batteries (NEDA 15A, IEC LR6). Typical semiconductor. For the real-time clock - 3 V lithium round battery
- Dimensions (WxHxD) and weight: 19.1 x 12.7 x 5.1 cm, 0.5 kg
